,----------------------. | UPGRADING MYSTIC BBS |------------------------------------------------------ `----------------------' 1. FIRST and ALWAYS create a backup of your BBS before upgrading. Generally upgrading goes pretty smooth, but there is always the chance of something going wrong whether it is Mystic or operator error! 2. There is no automatic upgrade process. The process is to install the full installation to a temporary directory, so that you have access to the latest version of the files. Then follow the upgrade instructions provided below for your specific version. Usually this just means replacing new binary files contained in the new alpha. DO NOT ATTEMPT TO DO A FULL INSTALL OVER YOUR EXISTING SETUP! 3. REVIEW THE WHATSNEW.TXT for this alpha. The WHATSNEW is structured to show what has been added/fixed between alphas, and also provides documentation for new or changed features. 4. Your BBS should be completely offline when you perform the upgrades. 5. REMEMBER #1 TO BACKUP YOUR BBS DIRECTORY! :) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ INDIVIDUAL ALPHA UPGRADE INSTRUCTIONS - FOR 1.11 TO A39 SEE THE NEXT SECTION ] .--------------------------------. | UPGRADING FROM 1.12 A46 to A47 |------------------------- `--------------------------------' - Replace the binaries with the new versions. You can do this by running: install replace c:\mystic ./install replace /mystic Note: This should also replace your prompts.dat file as well as the binary files. - Optional: Add new 132x36 full screen editor template to the default theme text directory (and for other themes you may have): install extract msg_editor.c132* c:\mystic\themes\default\text - If you use the default msg_editor.ini then you should replace it with the new one, otherwise refer to the What's New and the new default template for how to upgrade it to support Tagline changes. You can replace the default like this: install extract msg_editor.ini c:\mystic\themes\default\text - You will need to install the new Taglines template and default Taglines database: install extract taglines.ans c:\mystic\themes\default\text install extract taglines.ini c:\mystic\themes\default\text install extract taglines.dat c:\mystic\data It is also recommended that you go into System Configuration > New User Settings 2 and set "Taglines" to On so new users will default to having Taglines enabled if you wish them to (or set to Off if you want them off by default). - Install the new ANSI viewer template files: install extract ansiview.ans c:\mystic\themes\default\text install extract ansiview_help.ans c:\mystic\themes\default\text install extract ansiview.ini c:\mystic\themes\default\text - Install the new ANSI gallery template files: install extract gallery.ans c:\mystic\themes\default\text install extract gallery.ini c:\mystic\themes\default\text - If you have customized prompt #132 (the More prompt) in any of your themes, you will need to reset it to the default or update it to include the hotkeys as described in the whatsnew (add YNC to the beginning) - If you have customized prompt #522 (Yes No prompt text) in any of your themes, you will need to reset it to the default or update it to include the hotkeys as described in the whatsnew (add YN to the beginning). - Recompile all MPL programs. You can do this by running mplc -T in your root Mystic BBS directory to compile all scripts within your themes. - You can delete "fidopoll" as it has been officially replaced by the POLL command in MIS. It will no longer be included, supported, or upgraded. - If you disabled fallback in any of your themes then you must go into the theme editor and reset the values for fallback as these have been split into specific fallback settings for each category (menu, prompts, etc) - If you use the default bulletin system (bulletin.mps) then you should replace it with the newer one otherwise you will probably get an error trying to compile it: install extract bulletin.mps c:\mystic\themes\default\scripts - Execute upgrade.exe to update your data files for A47. - Delete "echodupes.dat" from your DATA folder to reset your echomail dupe scan database. - Force Mystic to regenerate your File List indexes by running the pack file base function in MUTIL: MUTIL -run PackFileBases - If you use the NNTP/NNTPS server at all or you plan to in the future then pack the message bases so Mystic can generate a MSGID for any message that is missing one: MUTIL -run PackMessageBases .--------------------------------. | UPGRADING FROM 1.12 A45 to A46 |------------------------- `--------------------------------' - Replace the binaries with the new versions. You can do this by running: install replace c:\mystic ./install replace /mystic - If you weren't already using the "new" message index reader that was added a year or so ago, then you may need to add the template for it to your themes install extract msg_index* c:\mystic\themes\default\text ./install extract msg_index* /mystic/themes/default/text You can also delete "ansimidx.ini" which is the old template found in the text directories of themes. It is no longer being used. - Add mis_poll.ans to your data directory: install extract mis_poll.ans c:\mystic\data - Run "upgrade" in your root Mystic directory to upgrade data files .--------------------------------. | UPGRADING FROM 1.12 A44 to A45 |------------------------- `--------------------------------' - This is just mostly a bugfix release and only requires the binaries to be replaced with the new ones. You must be running A44 already. You can do this by running: install replace c:\mystic ./install replace /mystic Where /mystic is your BBS root directory. If you're using a Unix based system of course you will need to have access to replace the files. .--------------------------------. | UPGRADING FROM 1.12 A43 to A44 |------------------------- `--------------------------------' - This is a big upgrade with lots of internal changes, so please it is very crucial that you make a backup before proceeding. - Extract Mystic archive to a folder. - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe nodespy.exe qwkpoll.exe upgrade.exe mplc.exe mide.exe You can do this automatically by typing "install replace " Example: install replace c:\mystic If you prefer to manually copy files, you can install Mystic to a temp directory and just copy the files installed in the new fresh installation over the old ones (this holds true for all steps here). - Type "install extract prompts.dat " or you can install A44 to a temporarily directory and manually copy prompts.dat from the A44 data directory. Example: install extract prompts.dat c:\mystic\data - If you use the default bulletin system (bulletin.mps) then you may want to replace it with an updated version that takes into consideration some of the theme inheritance features. install extract bulletin.mps c:\mystic\scripts - Switch to root Mystic directory and run upgrade.exe - Recompile all MPL scripts (mplc -all in your root Mystic directory) Note: Because mide/mplc.exe are sometimes stored in multiple locations it may be that the A44 mide/mplc.exe files get overwritten during the upgrade process. If that happens you can extract them by using the install utility: install extract mplc.exe c:\mystic install extract mide.exe c:\mystic The new recommended location for mplc is to keep it in the root Mystic directory moving forward. .--------------------------------. | UPGRADING FROM 1.12 A42 to A43 |------------------------- `--------------------------------' - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe nodespy.exe qwkpoll.exe upgrade.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - Copy userchat.ans and userchat.ini from the TEXT folder into your TEXT folder .------------------------------------. | UPGRADING FROM 1.12 A40-A41 to A42 |------------------------- `------------------------------------' - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe nodespy.exe qwkpoll.exe upgrade.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) .--------------------------------. | UPGRADING FROM 1.12 A39 to A40 |------------------------- `--------------------------------' - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe nodespy.exe qwkpoll.exe upgrade.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - If you use default installation replace the default.txt from DATA with the newer one, otherwise the following prompts have been modified or changed and will need to be updated/added to your custom themes: Changed prompts: 18, 419, 420, 463, 486 New prompts: 538-552 - Copy "msg_index.ini" from the TEXT folder into your TEXT folders - Copy "msg_index.ans" from the TEXT folder into your TEXT folders - Copy "msg_index_help.ans" from the TEXT folder into your TEXT folders - Copy "cfgroot4.ans" from the DATA folder into your DATA folder - Execute upgrade.exe - Recompile MPL programs .------------------------------------. | UPGRADING FROM 1.12 A37/A38 to A39 |------------------------- `------------------------------------' - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe nodespy.exe qwkpoll.exe upgrade.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - Run upgrade.exe once to update your data files then you can delete it. - Add prompts #528-#537 to the prompt file for all themes you have on your BBS. If you use the default prompts and have not customized, then you can simply replace default.txt in the DATA folder with that from the fresh installation. These new prompts can be found below or in default.txt in the fresh installation. See whatsnew for more information. - Copy over msgsearch.asc from the A39 installation to your TEXT directory if you use the default prommpts. - Replace "mis_events.ans" in your DATA folder with the newer one from the A39 installation - Replace "areafixhelp.txt" in your DATA folder with the newer one - Replace "filefixhelp.txt" in your DATA folder with the newer one - Replace "bulletin.mps" in your SCRIPTS folder with the newer one - Replace "onlyonce.mps" in your SCRIPTS folder with the newer one - Replace your msg_editor.ini from the text folder with the newer one from the A39 installation. If you use a custom msg_editor.ini then you will need to modify "str7" to include the Draft option by adding a F at the end of the hotkey list and then adding "D-Save as Draft" into the list of options. Use the default msg_editor.ini to guide you if you need help. - Recompile MPL programs (mplc -all in SCRIPTS directory) .------------------------------------. | UPGRADING FROM 1.12 A36 to A37/A38 |------------------------- `------------------------------------' - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe nodespy.exe qwkpoll.exe upgrade.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - Run upgrade.exe once to update your data files then you can delete it. - Copy cfgroot1.ans, cfgroot2.ans, and cfgroot3.ans to your DATA directory - mbbsutil.exe is no longer used, delete it from your Mystic directory .-----------------------------------. | UPGRADING FROM 1.12 A29-35 to A36 |------------------------- `-----------------------------------' - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe mbbsutil.exe nodespy.exe qwkpoll.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - Delete mis2.exe (the old mis is now gone and mis2 is now named mis) so you will need to be aware of that and possibly reconfigure your servers in the System Configuration and edit any auto-start scripts you may use - Recompile all MPL programs (run mplc -all in scripts directory) - Note that the phonebook in NodeSpy has changed slightly in A35, and in some cases you may need to edit out the "port" from the address field if you use NodeSpy's Terminal. .--------------------------------. | UPGRADING FROM 1.12 A27 to A28 |------------------------- `--------------------------------' - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe mbbsutil.exe nodespy.exe qwkpoll.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - Copy new mis2.exe to your root Mystic directory - Copy servers.dat from the DATA directory to your DATA directory - Copy mis_*.ans from the DATA directory to your DATA directory - Run mplc -all from SCRIPTS to recompile all MPL programs .------------------------------------. | UPGRADING FROM 1.12 A25-A26 to A27 |------------------------- `------------------------------------' - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe mbbsutil.exe nodespy.exe qwkpoll.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - Copy automessage.mps into your SCRIPTS directory if been updated to work with the new editor. - Recompile MPL programs (mplc -all in scripts) .--------------------------------. | UPGRADING FROM 1.12 A24 To A25 |------------------------- `--------------------------------' - Replace existing binary executable files with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe mbbsutil.exe nodespy.exe qwkpoll.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - Copy file_index.ini, file_index.ans and file_index_help.ans into your TEXT directory for each theme you use. - Added the [A] and [R] options to prompt #202 so you can update those if you chose to in your default.txt or any other themes: ; Select scanned file bases prompt 202 Toggle: |09[|11#-#,#|09], Select [|11A|09]dd All, [|11R|09]emove All, [|11?|09/|11List|09]: |XX .--------------------------------. | UPGRADING FROM 1.12 A23 To A24 |------------------------- `--------------------------------' - Replace existing binary executable files with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe mbbsutil.exe nodespy.exe qwkpoll.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - If you are using the default message editor template, then you should copy the msg_editor* files from the A23 TEXT directory over into your BBSes text directory for each theme you use. That's it you're done. If you have a CUSTOM message editor template, then you will want to review the following options in the msg_editor.ini from A24 and add them into your template. You can also remove the "[Options] suggestion" option as it is used. [Options] auto_suggest [Options] suggest_delay [Coords] Coord6 [Prompts] str16 [Prompts] str17 - There is now an optional spell checking package on the website and it will make its rounds in other places as well. It contains the instructions and files for how to enable the spell checking on every platform supported by Mystic. You may wish to take a look at this and enable the amazing spell checker that Mystic now provides, but this is completely optional of course - Go into QWK Networks and make sure they are set to Active if you use QWK networking. .--------------------------------. | UPGRADING FROM 1.12 A22 To A23 |------------------------- `--------------------------------' - Replace existing binary executable files with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe mbbsutil.exe nodespy.exe qwkpoll.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - If you haven't, copy the automessage.mps into your SCRIPTS directory as it has been updated for the new message editor. .--------------------------------. | UPGRADING FROM 1.12 A21 To A22 |------------------------- `--------------------------------' - Replace binary executable files with the new A22 mystic.exe mis.exe fidopoll.exe mutil.exe mbbsutil.exe nodespy.exe qwkpoll.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - Replace the following prompt within default.txt and in any custom theme(s) ; Login prompt: User enters a username found in trashcan.dat 375 |CR|12That user name is unacceptible. - Optional steps: - Copy menucmd.mps from SCRIPTS directory to your SCRIPTS directory - Run mplc -all in SCRIPTS to compile MPL programs .--------------------------------. | UPGRADING FROM 1.12 A20 TO A21 |------------------------- `--------------------------------' - Replace all binary executable files with the new A21 .--------------------------------. | UPGRADING FROM 1.12 A19 TO A20 |------------------------- `--------------------------------' - MAKE A BACKUP IN CASE SOMETHING GOES WRONG! - Replace all binary executable files with the new A19: mystic.exe mis.exe fidopoll.exe mutil.exe mbbsutil.exe nodespy.exe qwkpoll.exe upgrade.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - If you use all of the default prompts that come with Mystic as opposed to customized prompts, then you can copy default.txt from the A20 data. If you have customized your theme you will need to "replace" 3 prompts in your default.txt (and any other themes you use) with these new prompts: ; TELNET/RLOGIN: Connecting prompt &1 = address &2 = port 354 |CR|08> |07Escape sequence is |08|15CTRL+|15]|08.|CR|08> |07Connecting to |15|&1 |07port |15|&2|08.|CR ; TELNET/RLOGIN: Connected successfully 355 |08> |07Connected. ; TELNET/RLOGIN: Unable to connect 356 |08> |12Unable to connect: Press a key|PN .--------------------------------. | UPGRADING FROM 1.12 A18 TO A19 |------------------------- `--------------------------------' - MAKE A BACKUP IN CASE SOMETHING GOES WRONG! - Replace all binary executable files with the new A19: mystic.exe mis.exe fidopoll.exe mutil.exe mbbsutil.exe nodespy.exe qwkpoll.exe upgrade.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) - Copy the new msg_editor* files from the A19 text directory into the text directory of each theme you have. - If you use #B or #I MCI codes anywhere in your BBS they need to be updated See WHATSNEW for more information. If you use only the defaults then you can copy over the archive_view and ansimidx files which used the #I code: - Copy archive_view.ini into your text directory of each theme, or you can update str9 that uses the #I display code to use the new format of #I. If you have a custom archive viewer look, its easier to just update the str9 - Copy ansimidx.ini into your text directory of each theme, or you can update str8 that uses the #I display code to use the new format of #I. Any options you've changed will obviously need to be reconfigured if you choose to copy over the default, so updating the str8 will be easiest if you have a customized version. - Run upgrade.exe to update your data files to the new A19 formats. - Delete update.exe and upgrade.exe in your root directory if its there after running the upgrade. .-----------------------------------. | UPGRADING FROM 1.12 A6-A17 TO A18 |------------------------- `-----------------------------------' - Replace all binary executable files. Don't forget MIDE and MPLC in the scripts directory! - Execute MPLC -ALL from scripts directory, which will recompile your MPL programs to be compatible with the new engine update. - Run MUTIL's file base packer to regenerate your file indexes. THIS MUST BE DONE IF UPGRADING FROM ANYTHING PRIOR TO A17 (A6-A16). .-----------------------------------. | UPGRADING FROM 1.12 A5 TO 1.12 A6 |------------------------- `-----------------------------------' - Replace all binary executable files - Copy archive_view.ans and archive_view.ini to your TEXT directory of each theme you have. .-----------------------------------. | UPGRADING FROM 1.12 A4 TO 1.12 A5 |------------------------- `-----------------------------------' - Replace all binary executable files - Delete CFGROOT.AN1 from your data directory - Copy CFGROOT1.ANS from the A5 data directory into your data directory .-----------------------------------. | UPGRADING FROM 1.12 A3 TO 1.12 A4 |------------------------- `-----------------------------------' - Just replace the old A3 .EXE files with the A4 versions to upgrade. If you are upgrading from a version prior to A3 then you need to copy over the A4 binaries, add all new/changed prompts, copy the new A4 protocol.dat, recompile MPL files, and then run update.exe to upgrade data files to A3+ .-----------------------------------. | UPGRADING FROM 1.12 A2 TO 1.12 A3 |------------------------- `-----------------------------------' - Make sure you do a FULL BACK UP your system because there are many data file changes in this version, and a large amount of rewrites to things behind the scenes. Once you upgrade there is no going back unless you restore a backup. - Replace all old .EXE files with new ones from A3 (do not forget MPLC and MIDE in the scripts directory). - Update the following changed prompts into your data\default.txt file and any other prompt sets you're using: ; Press ENTER to start file transfer &1=selected protocol ; First word is input chars, followed by display text 065 SQ |CR|09Press |01[|15ENTER|01/|15S|01]|09tart or |01[|15ESCAPE|01/|15Q|01]|09uit your |15|&1 |09transfer: |XX ; Message from another node footer. First word contains input keys, followed by prompt 145 RC |CR|09Node Message: |01[|10R|01]|09eply, |01[|10C|01]|09hat, or |01[|10ENTER|01/|10Continue|01]|09: |15 - Copy update.exe into your root Mystic directory and run it one time. This will perform various work on your data files for the new version. You can delete update.exe now. - Recompile all MPL programs that you use (mplc -all in the scripts directory) - The protocol format has changed, and it is recommended you copy over the new protocol.dat from A3, especially if you do not use other external protocols. Note that the file format has changed, so you must have already ran upgrade.exe before you can copy the A3 protocol.dat over. - If you use the a preset upload base in the File Base Settings make sure it is pointing to the correct file base, as the numbering is now done by the the unique base ID. .--------------------------------. | UPGRADING FROM 1.11 TO 1.12 A2 |---------------------------- `--------------------------------' - Copy over new binaries (do not forget mide and mplc in scripts!) - Recompile all MPL programs (mplc -all in scripts) (not sure if needed) - Replace UNUSED prompt #315 in your default.txt (and any other themes) with this one: ; Ask for character translation (DOS CP437 or UTF8) ; &1 = Detected terminal type (or Unknown) 315 |CR|14[|150|14] MS-DOS CP437|CR[|151|14] UTF-8|CR|CRSelect Terminal Codepage [|15Enter = CP437|14]: |XX - The default protocol.dat has been updated to include the new internal Xmodem, Ymodem, Zmodem so if you want to use them you can copy the protocol.dat from the A1 installation over your old one. - There are some minor additions to MUTIL.INI please see the whatsnew.txt and/or look at the new MUTIL.INI for more information. ============================================================================= ============================================================================= ============================================================================= ============================================================================= Execute instructions in order, and be SURE to create a backup so you can start over should something go wrong. .----------------------------. | UPGRADING FROM 1.11 TO A39 |------------------------- `----------------------------' - Replace existing binaries with the new alpha binaries: mystic.exe mis.exe fidopoll.exe mutil.exe nodespy.exe qwkpoll.exe mplc.exe (in scripts directory) mide.exe (in scripts directory) upgrade.exe - Delete mbbsutil.exe binary, it is no longer used - Run upgrade.exe to upgrade data files - Perform the following in the DATA folder: - Copy protocol.dat from new alpha into DATA folder - Delete CFGROOT.AN1 from DATA folder - Copy CFGROOT*.ANS from the new alpha into your DATA folder - Copy mis_*.ans from the DATA directory to your DATA directory - Copy servers.dat from the DATA directory to your DATA directory - Copy areafixhelp.txt from the DATA directory to your DATA directory - Copy filefixhelp.txt from the DATA directory to your DATA directory - Perform the following steps in TEXT folder for themes: - Copy archive_view* from the new alpha into TEXT folders - Copy msg_editor* from the new alpha into TEXT folders - Copy file_index* from new alpha into TEXT folders - Copy msgsearch.asc from the new alpha into TEXT folders - Copy ansimidx.ini from new alpha into TEXT folders (if you use a custom one then you'll have to update it) - Perform the following steps in SCRIPTS directories: - Copy menucmd.mps from new alpha scripts directory - Copy automessage.mps from new alpha scripts directory - Copy bulletin.mps from new alpha scripts directory - Copy onlyonce.mps from new alpha scripts directory - Copy *.mpy from new alpha scripts directory - Execute "mplc -all" to recompile MPL programs - Perform the following PROMPTS updating: If you use default prompts, you can simply copy default.txt from the new alpha DATA directory into yours. If you have custom themes, then you'll need to update the following prompts in default.txt or any other custom themes you have: ; Press ENTER to start file transfer &1=selected protocol ; First word is input chars, followed by display text 065 SQ |CR|09Press |01[|15ENTER|01/|15S|01]|09tart or |01[|15ESCAPE|01/|15Q|01]|09uit your |15|&1 |09transfer: |XX ; Message from another node footer. First word contains input keys, followed by prompt 145 RC |CR|09Node Message: |01[|10R|01]|09eply, |01[|10C|01]|09hat, or |01[|10ENTER|01/|10Continue|01]|09: |15 ; Select scanned file bases prompt 202 Toggle: |09[|11#-#,#|09], Select [|11A|09]dd All, [|11R|09]emove All, [|11?|09/|11List|09]: |XX ; Ask for character translation (DOS CP437 or UTF8) ; &1 = Detected terminal type (or Unknown) 315 |CR|14[|150|14] MS-DOS CP437|CR[|151|14] UTF-8|CR|CRSelect Terminal Codepage [|15Enter = CP437|14]: |XX ; TELNET/RLOGIN: Connecting prompt &1 = address &2 = port 354 |CR|08> |07Escape sequence is |08|15CTRL+|15]|08.|CR|08> |07Connecting to |15|&1 |07port |15|&2|08.|CR ; TELNET/RLOGIN: Connected successfully 355 |08> |07Connected. ; TELNET/RLOGIN: Unable to connect 356 |08> |12Unable to connect: Press a key|PN ; Login prompt: User enters a username found in trashcan.dat 375 |CR|12That user name is unacceptible. ; Download batch file queue via FTP/WEB prompt 528 |CR|14Download via [|15W|14]eb Site, [|15F|14]tp Site, or [|15ENTER|14/Protocol]? |15 ; Download batch file queue via FTP prompt 529 |CR|14Download via [|15F|14]tp Site, or [|15ENTER|14/Protocol]? |15 ; Download batch file queue via WEB prompt 530 |CR|14Download via [|15W|14]eb Site, or [|15ENTER|14/Protocol]? |15 ; Download batch queue URL prompt &1 = URL link 531 |CR|09Download your files at the following site (expires in 1 hour):|CR|CR|11|&1|CR|CR|PA ; Message draft header 532 |16|CL|09Ú|$D77Ä|01¿|CR|09³|17 ± |15Saved Message Drafts|$D54 |01|16³|CR|09À|01|$D77ÄÙ|CR|CR |07## Date Base Subject|CR |01ÄÄ ÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ; Message draft item list ; &1=draft # &2=date &3=time &4=to &5=subject &6=base name 533 |15|$L02|&1 |11|&2 |14|$R25|&6 |10|$R35|&5 ; Message draft prompt &1 = high draft # 534 |CR|09Select draft to resume (1-|&1), (D)elete, or (Q)uit: |15 ; Message draft scan prompt 535 |CR|12You have |15|MF |12saved draft message(s). View them now? |11 ; Message draft no saved drafts 536 |CR|12You have no saved draft messages.|CR|CR|PA ; Message draft delete prompt &1=high draft # 537 |CR|09Delete which draft (1-|&1), or (Q)uit: |15 - Perform the following final steps: - You must run MUTIL's file base packer in order to regenerate index files for your file areas.' - If you use QWK networking, go into your QWK networks in the configuration and set them to "Active" as they can now be toggled off or on. - If you've configured a preset upload base in the File Base settings make sure it matches the correct ID in the file base editor for the base you want uploads to be placed. - Similar to the above, if you use the MX menu command to post text files, make sure the ID matches the ID in the message base editor for the base you want to post to.